Commercial Access Control
Northeast Fire Systems designs and installs commercial access control systems that manage entry to doors, elevators, and secured areas. We handle the credentials, door hardware, wiring, software, and the fire alarm integration that code requires, for single sites and multi-building campuses.
Request Service or Installation
Get in touch with NEFS today.
What Complete Access Control Requires
Good access control is more than a card reader on a door. It has to fail safely in a fire, give people free exit, keep a reliable record, and stay manageable as staff change. NEFS handles the design, the door hardware, the wiring, and the software so the whole system holds together.
- Card, fob, and mobile credentials
- Free egress and fail-safe design
- Fire alarm release integration
- Audit trails and remote management
Access Control Design
We start with your doors: which ones need to be secured, who should get through them, and when. From there we choose readers, credentials, and locking hardware that fit the door and the traffic it sees. A busy main entrance and a back server room call for different approaches, and the design accounts for that.
Credentials & Readers
Credentials run from proximity cards and fobs to smartphone credentials that let staff use a phone instead of a badge. Mobile credentials are easy to issue and revoke remotely, which matters when someone loses a card or leaves the company. We match the reader to the credential and to the security level each door needs.
Door Hardware & Wiring
The lock does the actual work, so it has to be right. We install electric strikes, magnetic locks, and the request-to-exit devices and door position switches that go with them, wired cleanly back to the controller. Poor hardware or wiring is a common point of failure, so we install and terminate everything properly.
Fire Alarm Integration
Any door held by a magnetic lock has to release automatically when the fire alarm activates. That tie-in is a code requirement, not a feature, and it is how people get out in an emergency. We integrate access control with your fire alarm so locked doors free up the instant an alarm sounds.
Management & Reporting
Once the system is running you control it from software, on site or remotely. Add or remove a person, set schedules so a door unlocks during business hours, and pull a report of who went where. If something happens, the audit trail gives you a clear record.
Frequently Asked Questions about Access Control
Yes. Mobile credentials work over Bluetooth or NFC, and you can issue or revoke them remotely without printing a card.
Doors on magnetic locks release automatically when the fire alarm activates. We wire that integration in because code requires free egress in an emergency.
Yes. Access control scales from a single door to multiple buildings run from the same software.
Our difference
What You Can Expect from NEFS
NEFS installs access control that fails safe, gives occupants free egress, and stays manageable as your organization changes. We handle the design, hardware, wiring, and software as one system.
Straight recommendations
We tell you what your building needs to meet code, and what it does not. We do not sell equipment you have no requirement for.
Manufacturer-trained technicians
Our technicians are manufacturer-trained on the systems we install and equipped to resolve most issues on the first visit.
One provider for the life of the system
From installation through annual testing, repair, and upgrades, NEFS stays your single point of contact for your access control system.